PCBs we make
We are a UK prototype and small volume PCB manufacturer. Every board is made in our own factory. This is what we build, with the figures that matter.
Board types
Up to 660 x 533 mm, with every board electrically tested on flying probe testers.
Single and double-sided
- Conventional and plated through hole
- 0.05 to 4.8 mm thick
- Copper from 0.25 oz to 24 oz
Flex-rigid
- Multilayer flex-rigid up to 16 layers
- 0.2 to 3.2 mm thick
- No connectors between sections
IMS metal backed
- Aluminium or copper base
- For LED and power boards
- Bonded heatsinks also available
RF and microwave
- Rogers RO4350B and RO4003C
- Low loss and PTFE laminates
- For high frequency designs
Technologies
Features we build into those boards, all in our own factory unless stated.
Resin filled vias
- Vacuum filled in-house
- Filled and capped (IPC-4761 Type VII) for via-in-pad
Heavy copper
- Up to 24 oz (840 micron) copper
- Above 12 oz we review the design before agreeing the build
Controlled impedance
- Single ended and differential
- TDR test coupons available at a charge
Fine line and micro BGA
- 0.076 mm track and gap at 0.25 oz copper
- 50 micron tracks by arrangement
Surface finishes
- In-house: lead-free HASL, tin-lead HASL, ENIG, immersion silver
- ENEPIG through a subcontractor
- Bare copper on request
Prototype and small volume
Prototypes and small batches are what our factory is set up for.
Specialised materials
- High Tg FR4, polyimide, Rogers and PTFE
- Contact us to confirm availability or lead time